Day 76 - 5/7/2012

Time to get back to the rear window fabrication adventures! I got the vertical sides all spot welded and ground down, a very tedious task, that was both stressful and fun at the same time!

Got to grind it down so the vinyl top will sit flat!

Got all the paint stripped off. Used one of those 3M stripper wheel/pads to get in the crevices in preparation for filler and paint.

Kept working along the top area, it was real thin on the passenger side. Lower heat welds and titanium putty to come. Working around the lead was also a fun task! It had to be all dug out and welded underneath were it sat.

Also I keep stripping the original roof paint some more, being careful to not warp the thin sheet metal.